Lithium battery to power LoRaWAN® devices
This lithium battery from ELSYS reliably supplies LoRaWAN devices of the ERS and EMS series autonomously with power for several years.
MinoConnectUSB and optical head - Set for configuration and readout of ZENNER devices
Set for mobile reading and configuration of ZENNER measuring devices and sensors.
The "MinoConnectUSB Set Opto" is mainly used to read out and parameterize ZENNER devices via the optical interface.
The two-part set consists of the "MinoConnectUSB", which is connected to a Windows mobile device or Laptop via USB, and the ZENNER IrDA "IrCombiHead" optical head. This is positioned on the optical interface of the respective ZENNER measuring device or sensor. The connection between MinoConnectUSB and the opto head is made via a SubD9 connector.
Using the additional configuration and readout software MeteringSystemSolution (MSS) - in combination with the MinoConnectUSB Set Opto - the settings required on the device can be conveniently made from the Windows laptop or mobile device
Features of MinoConnectUSB:
USB / RS232 and RS485 interface
LED operating status
In conjunction with the ZENNER IrCombiHead, it supports the IEC 62056 (1107) and IrDA interfaces, the IEC 62056 (1107) and IrDA interfaces
Additionally required configuration software MSS:
Please note that the configuration software MSS is required to configure and read out ZENNER LoRa devices. This can be downloaded free of charge as a demo version. You will find the link below under "Related links".
LoRaWAN® Angle Antenna (SMA) for CleverCity Greenbox Compact 3.
For the safest possible operation or to ensure the best possible radio reception, we recommend an additional antenna for each Greenbox Compact 3, which is used for single mast control.
The angled rod antenna with SMA connector ensures the connection between the LoRaWAN® network and the GreenBox Compact 3.
It is used in plastic switch boxes, house installations etc. It is screwed directly onto the GreenBox.
LoRaWAN Configuration Cable for Digital Matter Yabby Asset Tracker.
Due to the small form factor of the Yabby Asset Tracker a special adapter is needed for configuration via USB.
Included in delivery:
USB Cable
Adapter board
Connector cable
USB configuration adapter for sensor administration from Lobaro
The Lobaro USB Configuration Adapter allows easy administration of our sensors:
Configuration (e.g., LoRaWAN parameters, time intervals)
Firmware updates
Log messages / error analysis
Power supply of the sensor node
Wireless Plug-in module for heat meters and heat meter calculators Landis + Gyr UH50 / UC50
The LoRaWAN radio module CMi4110 is a plug-in module that can be installed in a Landis + Gyr heat meter from the UH50 series or in a calculator from the UC50 series.
It transfers the data from the heat meter via LoRaWAN. The module can be easily retrofitted in the calculator at any time.
Features:
Battery life at least 11 + 1 years, configurable to 16 + 1 years for meters with D-cell
Configuration takes place with the free elvaco configuration app, configuration of the heat meter is not required
NFC interface for module configuration
Compatibility:
The CMi4110 is designed for the L + G UH50 meters with firmware version 5.15 or higher and can be used for all L + G UC50 calculators with firmware version 8.06 or higher.
DIN rail adapter for CleverCity Greenbox Compact 3.
With the DIN rail adapter, you can optionally and if necessary also mount the Greenbox Compact 3 on a DIN rail - for example in a distribution box.
This mounting variant is often used when the device is used for string control. The adapter is attached to the back of the Greenbox with the four screws supplied.
SENSATIVE +Switch
The +Switch is an accessory product for the SENSATIVE Strips. With the +Switch you can add a switch to the Strips sensors to control IoT devices or IoT scenarios.
This adds an additional button function to the Strips quite easily when needed. The +Switch is compatible with all LoRaWAN® Strips.
LoRaWAN mast antenna for CleverCity Greenbox Compact 3.
For the safest possible operation or to ensure the best possible radio reception, we recommend an additional antenna for the Greenbox compact, which is used for single mast control.
The mast antenna secures the connection between the LoRaWAN network and the green box built into the street lighting mast.
The antenna is mounted flush on the mast with just one drill hole and secured with the enclosed strap. A foam rubber seals the antenna and prevents against moisture penetrating.
Technical data:
Frequency
865 ... 880MHz
Amplification
0dBd (2dBi), typically
Protection class
IP66
Polarization
linearly
Sending power RMS
< 10W
Temperature range
-40°C ... +85°C
UV-protection
> 10 years
Material
ABS
Cable length
ca. 4m
Weight
ca. 100g
Dimensions
150x38x36mm
Fixing belt
Mast diameter 80 to 140mm
SENSATIVE +Clip
The +Clip is an optional accessory product for mounting SENSATIVE strips.
If the adhesive back of the strips is not sufficient due to the surface condition or an easy mounting and especially dismounting is necessary, then the +Clip is ideally suited.
Standard bracket for Wastebox level sensor LoRaWAN®
The standard bracket can optionally be used to attach or mount the wastebox.The standard holder also serves as dust protection for the battery compartment of the wastebox.Individual, container-specific intermediate parts can be inserted between the standard holder and the container for optimal alignment of the sensor with the filling material.
2 lithium batteries for powering LoRaWAN® devices with 1.5VThese high-quality lithium batteries provide LoRaWAN devices with reliable power autonomously for several years. They weigh 1/3 less than standard alkaline batteries and are leak-proof.Technical specifications:Nominal voltage: 1.5V Nominal capacity: 3000mAh Operating temperature: - 40°C to + 60°C Diameter: 14mm
Length: 50,5mm Illustration may vary.
ELSYS lithium battery for IoT sensors of the ESM series.
Special battery suitable among others for the ELSYS ESM5k multi-sensor for measuring air quality, light and acceleration (see following tab "Accessories").
Technical Data:
Model designation: ER14250
Nominal voltage: 3.6V
Capacity: 1200 mAh
Weight: 10 g
Dimensions (H x W): 25.5 x 15 mm
also suitable as replacement battery for HCB ER14250M 1/2AA 3.6V
Figure may differ.
Manufacturer:
ELSYS
€4.00*
This website uses cookies to ensure the best experience possible. More information...