Smoke detector EASY PROTECT RADIO with LoRaWAN® Interface from ZENNERAttention: This item can only be ordered in increments of 4! Smoke detector from ZENNER approved according to DIN EN 14604 reliably detects all fire classes. It fulfils all standards and approvals required in by German regulations. Allows remote maintenance in accordance with DIN 14676-1 Type C construction: Complete remote inspection Comfort function: event-based LoRaWAN telegram when smoke is detected can be activated via downlink The LoRaWAN device detects the smoke development optically and is additionally equipped with a temperature sensor. This makes it particularly reliable in responding to both slow smouldering fires as well as fast fire progressions with high temperature development. The permanently installed battery of the smoke detector has a lifetime of 10 years and is automatically activated during assembly. The EASY PROTECT Radio is equipped with a large test button for muting as well as with LED control lamps, which ensure the functionality of the and possible interference signals. Note: In the case of smoke detection, an alarm tone is triggered, an alarm message via LoRaWAN can be activated via downlink from FW version 2.20. Approved according to DIN EN 14606 Approved according to DIN 14676 OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ZENNER Smoke Detector Easy Protect Radio LoRaWAN is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser.

Lithium battery to power LoRaWAN® devices This lithium battery from ELSYS reliably supplies LoRaWAN devices of the ERS and EMS series autonomously with power for several years.

Low cost LoRaWAN sensor from ELSYS for indoor climate monitoring The ELSYS ERS Lite is an affordable LoRaWAN room sensor for measuring the indoor climate (temperature and humidity) in an unobtrusive housing for easy wall mounting. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ELSYS ERS Lite wireless Multi room sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

Mobile LoRaWAN® Field Tester / Range Tester from Adeunis LoRaWAN field tester for real-time network analysis and signal strength testing.  It allows the transmission, reception and immediate display of LoRaWAN messages and their quality/field strength in the network used. Use Cases: Coverage and range tests with geolocation of the measuring points Optimization of sensor locations / positions for assembly planning Selection of the most suitable network

BOSCH LoRaWAN® Parking Sensor Parking Lot PLS 868 MHz IP67 The LoRaWAN® Parking Lot PLS is a sensor for Smart Parking and Smart City applications. The sensor is battery powered and designed for surface mounting. Both screw and adhesive mounting is possible. The parking sensor detects and reports the occupancy of individual parking spaces / parking lots and thus enables active parking space management. The simple retrofit solution for the monitoring of parking spaces can be installed in a few minutes. Drivers in large cities spend on average more than 40 hours a year behind the wheel alone to find parking spaces. Around 30 % of inner-city traffic and the associated CO2 emissions are accounted for by the search for parking space alone. However, the question of where the next available parking space is has been answered much faster than before with digital solutions for some time now. This time saving is made possible by modern Internet-of-Things technologies. Sensors are integrated into a networked overall mobility solution via LoRaWAN® radio technology (Long Range Wide Area Network). The radio technology makes it possible to collect data from sensors over a large radius via a gateway and send it to intelligent traffic control systems. The information about the occupancy status of the parking lot ends up in the back end of the mobility system, where it is processed and made available to the end users via navigation system, smartphone app or website. In this way, motorists can navigate to the nearest available parking space. The back-end system can also store the type of parking space involved, i.e. "normal" surface parking or special parking space (women's, family or disabled parking, e-charging station). The solution is also suitable for monitoring escape routes (e.g. fire department access roads) or e-charging stations. The parking sensor contains two independent sensor elements, a magnetometer to detect changes in the magnetic field of the environment and a RADAR sensor to measure the reflectivity of the object above the sensor. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Bosch Parking Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser   

Versatile LoRaWAN CO2 Sensor from ELSYS for indoor climate monitoring  A LoRaWAN room sensor for measuring the indoor climate in an inconspicuous housing for simple wall mounting. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ELSYS ERS CO2 multi-room Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

ZENNER CO2 INDICATOR L868 ID A for LoRaWAN® The ZENNER CO2 INDICATOR is a compact indoor LoRaWAN® radio sensor (868MHz) for measuring the CO2 content of indoor air. This product uses the photoacoustic principle to detect the CO2 concentration (ppm) in real time, enabling more efficient ventilation behaviour and faster response time. With the integrated display and the colour-changing LED display, the sensor always provides real-time information about the current CO2 value, the battery level and the status of the LoRaWAN® connection. An optimal stationary and mobile companion in the company, at the workplace, in the meeting room at a meeting or in the canteen. It can be placed on any flat surface. In addition, the device can also be used "stand alone", i.e. without a LoRaWAN® connection, e.g. at a meeting outside the company, when visiting a customer or a restaurant outside the range of the LoRaWAN® network. Without LoRaWAN® connection, however, no remote monitoring or alarming can take place. The CO2 limits can be set individually by radio command (downlink). The device can be operated with the integrated rechargeable battery or permanently powered by a standard USB-A power supply unit 5V. Please note that only the USB-A to USB-C charging cable is included, a power supply unit is also required. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ZENNER CO2 Indicator is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the ZENNER CO2 Indicator data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  NOW NEW also available and expandable within the Actillity ZENNER DataCake Starterkit on ThingPARK. Download CO2 Sensor Actility ZENNER Datacake Bundle Link to ThingPARK Actility ZENNER DataCake AirQuality Solution Use Cases Indoor Air Quality Smart Building Smart School Smart Office Smart Home Product Features Modern design Display with CO2 indication (ppm) as well as quality of LoRaWAN connection and battery status LED traffic light Integrated battery Configuration Over the Air (OTA) Evaluation of the CO2 measured values Range (ex works) Evaluation LED Farbe < 800ppm normal green 800 – 999ppm slightly increased yellow 1.000 – 1.399ppm high purple > 1.399ppm very high red The measuring ranges can be set individually via LoRaWAN® downlink. Specifications Model CO2 INDICATOR L868 ID A Weight 115g Size 63,6 x 46,0 x 54,6mm Display Size 59,9 x 49,9mm LoRaWAN® Klasse A Frequency 863 ~ 870MHz Transmit Power max. 14dBm Battery 2.000mAh Power Input 5V⎓ 1A (Hinweis: im Lieferumfang ist kein Netzteil enthalten) Operating Temperature 0 ~ 40℃ Operating Humidity 0 ~ 99%rH (nicht kondensierende Umgebung) CO2 Measuring Range 400 ~ 9.999ppm Accuracy of 400 ~ 2.000ppm --> ±50ppm Accuracy of 2.000 ~ 9.999ppm --> no guarantee    Scope of Delivery ZENNER CO2 Indicator L868 ID A for LoRaWAN User Manual USB-A to USB-C Cabel Notice: There is no 5V power supply included in the delivery.  You can use a commercially available smartphone USB-A power adapter, for this purpose.

LoRaWAN® Temperature Sensor Temp from Adeunis Temperatur sensor with 2 probes. Highlights: Integrated and remote temperature probes Sending an average of values over a given period Local and remote configuration Consumption controlled for optimized autonomy

Low cost LoRaWAN sensor from ELSYS for indoor environment monitoring A LoRaWAN room sensor for measuring the indoor climate (temperature, humidity), light and motion (PIR), in an inconspicuous housing for simple wall mounting. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ELSYS ERS multi-room Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

LoRaWAN® sensor for indoor opening activity The EMS Door Sensor from ELSYS detects opening activities and movements (accelerometer). Due to the very minimalistic and compact design, the sensor can be easily mounted on doors, windows, cabinets, etc. with the adhesive strips already attached. This makes the sensor ideal for a wide range of applications: Smart Buildings Workplace Management Recognition of opening activities Motion detection Like all Elsys sensors, this one can be configured easily and quickly via NFC (Sensor Settings App) or over the air (OTA) via downlink. The sensor requires a 3.6V AA lithium battery for power supply. This battery is not included in the scope of delivery and must be ordered separately (see accessories). OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ELSYS EMS DOOR and WINDOW cotact LoRaWAN® Sensors is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

Digital Matter LoRaWAN® Small Geolocation Asset Tracking Sensor Yabby  This very compact and rugged geolocation tracking device that has been designed for tracking assets where a small device is required, such as on animals, livestock, packages, bags, bicycles and other assets. The IP67 rated housing is rugged and UV stable. It can be mounted on assets that are exposed to rain, dust and outdoor conditions. The tracker can operate in ultra-low power modes, and with a battery life of up to 3 years it can be attached to assets and tracked without needing to change batteries often. This small GPS tracking device has a high-performance GNSS module (GPS, BeiDou, Galileo, GLONASS, QZSS), a 3D accelerometer and internal antennas for GPS and LoRaWAN communications. Dimensions 85 mm x 63 mm x 24 mm Batteries 3 x “AAA” size 1.5V alkaline or lithium batteries> Sleep Current 10uA (micro amps) Battery Life with Adaptive-Tracking can be set to use Adaptive-Tracking technology where the accelerometer and GPS data are used to intelligently work out if it is moving and to send frequent updates, and to scale the update rate down to once per day if the asset is stationary - to preserve battery life. 3 years @ one position per day (at 25°C). Operating Temperature -20°C to +60°C High sensitivity GPS Supports concurrent GPS and GLONASS and other GNSS systems 72 channel high sensitivity receiver -167dBm industry leading tracking performance Optimal hot-start performance. Configuration The most common configuration parameters can be updated OTA via LoRaWAN downlink messages. An additional USB configuration adapter and cable (not included), allows to upload firmware updates and configuration information on the device.

Monitor home & office environment with TEKTELIC's LoRaWAN® Smart Room PIR Sensor (EU-868). The KONA Smart Room Sensor integrates practical functionality into a very small form factor. The Smart Room PIR Sensor is an ideal solution for holistically monitoring the home and office environment, whether measuring and reporting temperature, humidity, light, motion, vibration, open/closed doors and windows, or other user-defined functions. The sensor is optimized for long battery life and excellent transmission performance. It is fully Over The Air (OTA) configurable by the user for custom applications, behaviors, thresholds, trigger events, and reports, so you can implement many different smart home IoT applications with the same device. There are two variants of the KONA Smart Room Sensor. Once the PIR variant (motion detection) shown here and the BASE variant. The latter can also be found in our store under item number 173400 as well as following in the "Similar items" tab. Advantages & Features: User configurable parameters and thresholds Designed for optimal battery life (see table in datasheet) Easy wall, ceiling or table mounting Easy deployment with slim design Very small form factor IP30 Ingress Protection Functions & Applications: Motion detection (doors, windows, drawers) - Reed switch (magnet is required) G-force measurement (adjustable trigger) Motion detection (PIR) Light detection (on / off) Temperature measurement Humidity measurement Technical data: Dimensions: 42 x 42 x 17 mm Weight: 25 g Protection class: IP30 Operating temperature: 0 - 60°C Battery type: CR2477 RF Power: 15 dBm RF Sensitivity: up to -137 dBm internal antenna LoRaWAN Class A

MinoConnectUSB and optical head - Set for configuration and readout of ZENNER devices Set for mobile reading and configuration of ZENNER measuring devices and sensors. The "MinoConnectUSB Set Opto" is mainly used to read out and parameterize ZENNER devices via the optical interface. The two-part set consists of the "MinoConnectUSB", which is connected to a Windows mobile device or Laptop via USB, and the ZENNER IrDA "IrCombiHead" optical head. This is positioned on the optical interface of the respective ZENNER measuring device or sensor. The connection between MinoConnectUSB and the opto head is made via a SubD9 connector. Using the additional configuration and readout software MeteringSystemSolution (MSS) - in combination with the MinoConnectUSB Set Opto - the settings required on the device can be conveniently made from the Windows laptop or mobile device Features of MinoConnectUSB: USB / RS232 and RS485 interface LED operating status In conjunction with the ZENNER IrCombiHead, it supports the IEC 62056 (1107) and IrDA interfaces, the IEC 62056 (1107) and IrDA interfaces Additionally required configuration software MSS: Please note that the configuration software MSS is required to configure and read out ZENNER LoRa devices. This can be downloaded free of charge as a demo version. You will find the link below under "Related links".

SENSATIVE Strips Presence for LoRaWAN® The Strips Presence by SENSATIVE is an ultra-thin (3mm) active IR occupancy sensor for offices and buildings. The sensor monitors e.g. desk occupancy by measuring objects and people at close range (configurable up to 50cm). The minimalist design as well as the easy installation (adhesive back) and long battery life, make the Strips the go-to sensor for architects and design-conscious users. The active IR sensor is activated ex works. In addition, the integrated magnetic sensor can be activated to monitor doors and windows. The data and measured values are transmitted to the corresponding backend via LoRaWAN®.   OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Presence is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser    Areas of application: Smart Office Smart School Smart Building Smart Home Performance features: Model: Strips Presence Measurement parameters: Active IR (infrared) occupancy sensor Configurable: magnetic sensor (door and window) Dimension: 195mm x 15mm x 3mm Operating conditions: -30°C to +60°C Application area: Indoor Mounting: adhesive backside LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip

VICKI LoRaWAN® Thermostatic radiator valve Vicki is the perfect solution for all those who are looking for an intelligent and efficient radiator thermostat, want to control it conveniently from anywhere and at the same time want to save a lot of energy costs.With Vicki, you can easily and conveniently regulate your room temperature, even remotely. The Vicki radiator thermostat is very easy to retrofit and monitors the temperature and humidity for you. You set the desired target temperature by simply turning the outer ring of the device. At the same time, the target temperature is displayed directly on the device and is easy to read. Vicki is so smart that it automatically detects when you open a window and temporarily regulates the radiator in that room down. This way, you never run the risk of wasting unnecessary energy when ventilating.Two lithium batteries are included in the delivery.  Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: VICKI LoRaWAN Measurement parameters: Temperature: +/- 0.20°C Humidity: +/- 2% RH Dimension: 54mm x 78mm x 50mm Operating conditions: -20°C to +60°C Application area: Indoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: 2X AA Energizer Lithium L91 Battery replaceable: yes Battery life: up to 10 years

Ultrasonic LoRaWAN Sensor Tek766 for tank level monitoring. The LoRaWAN-based Tek766 is a battery powered, configurable ultrasonic level sensor with integrated wireless interface. Use cases: Monitoring of fill levels in tanks Monitoring of fluid levels Ensuring the continuous availability of fuels or other operating resources Monitorable liquids: Fuels Heating oil Kerosene Water Waste oil and more Benefits: Accurate and reliable monitoring of tank levels Alert when filling levels are below or exceeded Optimization of procurement and delivery Optimizing your logistics Increase in process efficiency OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Tekelek TEK766 Ultrasonic Level Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  Technical characteristics: Remote configuration Easy installation Up to 14 years of battery life LoRaWAN radio interface (868 MHz) Up to 15 km range CE conformity and ROHS conformity

Skiply Smilio Multiservices Button für LoRaWAN® und Sigfox This Multi-Service Button is a compact IoT device, based on Sigfox and LoRaWAN, which is hermetic (IP65) and extreme temperature-resistant (-40°C / +60°C). 5 buttons allow to report multiple events and trigger automated actions. This allows you to monitor and optimize your customer experience in real time. Remote configuration via downlink is possible. The special feature of the Smilio Multiservices Button: it can be used with LoRaWAN® as well as Sigfox and that without any special configuration. For this purpose, there is a so-called "jumper" under the battery cover. For use with Sigfox, simply leave it in place. If you want to use the button with LoRaWAN® instead, remove all batteries and then the jumper. Dual mode Sigfox/LoRaWAN wireless technology. Buttons without moving parts + antibacterial special treatment = record hygiene and durability. Remote configuration via Downlink. Robust and firmly fixed (vertical or horizontal fixation). Compact dimensions (100x100x45 mm). Weight < 200 g (without batteries). Hermetic (IP65) and extreme temperature-resistant (-40°C / +60°C).

LoRaWAN® Angle Antenna (SMA) for CleverCity Greenbox Compact 3. For the safest possible operation or to ensure the best possible radio reception, we recommend an additional antenna for each Greenbox Compact 3, which is used for single mast control. The angled rod antenna with SMA connector ensures the connection between the LoRaWAN® network and the GreenBox Compact 3. It is used in plastic switch boxes, house installations etc. It is screwed directly onto the GreenBox.

Sensoneo Smart Waste level sensor Single 3.0 for monitoring the amount of waste. The Sensoneo Single Sensor LoRaWAN is an enterprise-class sensor. Designed for various types of containers from high capacity to small containers, it meets the needs of the customers wanting the secure data transfer to cloud-based applications. The ultrasonic sensors is able to monitor any type of waste in bins of various type and size. It is very robust, water and shock resistant and can be connected to any LoRaWAN. Get real-time data on fill-level in bins. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Sensoneo Smart Waste Ultrasonic Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser   

LoRaWAN Configuration Cable for Digital Matter Yabby Asset Tracker. Due to the small form factor of the Yabby Asset Tracker a special adapter is needed for configuration via USB. Included in delivery: USB Cable Adapter board Connector cable

R311W LoRaWAN® Leakage Sensor from Netvox to Prevent Water Damage The Netvox R311W sensor is a LoRaWAN® class A device and enables the detection of water leaks. As soon as the sensor detects a leak, it sends an immediate message to the connected backend. With ZENNER's ELEMENT IoT platform, you can thus receive an immediate email via the alarm and control management and avoid major water damage. Thanks to its small form factor, the device can be installed inconspicuously in almost any location. Areas of application: Data centers Machine and server rooms Pipelines in basements Sanitary facilities Keel rooms of ships OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Netvox R311W is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

ELSYS ERS Sound LoRaWAN® multi-sensor for indoor climate and noise level A LoRaWAN room sensor for measuring the indoor climate with noise level in an unobtrusive housing for easy wall mounting.

Watteco Smart Plug LoRaWAN® Radio Socket for energy monitoring Smart Plug is a LoRaWAN® Class C smart home device that monitors, controls, reports, home's electronics appliances connected and electrical line quality. Product Details: Up to 3,500W and 16A Monitoring & Report: Power, Energy, Voltage & Frequency Power supply via mains voltage Dimensions 114x62x40mm RF TRANSCEIVER Frequency (MHz) EU: 863-870 Transmit Power (dBm) +14 Receiver Sensitivity (dBm) -140 FIRMWARE Protocol: LoRaWAN®, Class C Transmission cycles: 10mn, 1h, 12h or defined by network Activation method: Activation by Personalization (ABP) Over-The-Air Activation (OTAA) Data encryption: AES128 ELECTRICAL Operating voltage (VAC): 100-250 Power frequency (Hz): 50-60 Max load capacity: 16A/250VAC POWER METER Active/Reactive Power resolution (W / Var): 1 Active/Reactive energy resolution (W.h / Var.h): 1 Power accuracy: < 1% above 40W >1% below 40W Energy measurement bandwidth: 1,23kHz QUALITY LINE INDICATOR Frequency: current/min/max values RMS Voltage: current/min/max values Over voltage: Number of occurrence the voltage exceed the overvoltage threshold Sag: Number of occurrence the main voltage is lower than the “Sag voltage Threshold” for at least the number of half cycle defined by the “Sag cycle Threshold” attribute INTERFACE LED Indicator: Configuration and pairing Button: Reset, ON/OFF MECHANICAL FEATURES  Dimension (mm): 62x114x40 Plug Type: Europe (optional US version) ENVIRONMENTAL Operating temperature (°C): -20 / +50 DIRECTIVES & STANDARDS EN, 61000-4-2 EN 300-220-1 V2-4-1, EN 301 489 V1-6-1 CE, FCC part 15.247 subpart C, RoHS recommendation compliant    

Detecting people flows with the Parametric Radar Peopleflow Sensor PCR2 Indoor (Bi-Directional) PCR2 is a camera-less people counting system for indoor use with LoRaWAN connectivity. The system includes powerful signal processing that enables directional counting of humans. Counters are transmitted in regular intervals over a public or private LoRaWAN network. Bi-Directional counting of persons passing by Integrated 24GHz Radar sensor with advanced signal processing No surveillance camera – no privacy issues Vertically (ceiling) or horizontally mountable Integrated Antenna Wide range power supply input 5-12 VDC or USB 5V LoRaWAN 1.0.2 Class A device LoRaWAN Region: EU868 PCR2 Bi-Directional People Counter Indoor 2 LEDs for counting signalisation Indoor version with slim line enclosure and hidden fixing points All Parametric Sensors are equipped with USB or NFC for easy configuration with a freely available configuration tools.