EU-Shipping
Ready for dispatch within 24h
Different payment methods
Service +49 711 9491 2200

OUR TOP PRODUCTS

Adeunis mobile Field Test Device LoRaWAN
Mobile LoRaWAN® Field Tester / Range Tester from Adeunis LoRaWAN field tester for real-time network analysis and signal strength testing.  It allows the transmission, reception and immediate display of LoRaWAN messages and their quality/field strength in the network used. Use Cases: Coverage and range tests with geolocation of the measuring points Optimization of sensor locations / positions for assembly planning Selection of the most suitable network
Manufacturer: Adeunis

€249.90*
%
Tip
PLUG&PLAY
ZENNER CO2 INDICATOR L868 ID A for LoRaWAN®
ZENNER CO2 INDICATOR L868 ID A for LoRaWAN® The ZENNER CO2 INDICATOR is a compact indoor LoRaWAN® radio sensor (868MHz) for measuring the CO2 content of indoor air. This product uses the photoacoustic principle to detect the CO2 concentration (ppm) in real time, enabling more efficient ventilation behaviour and faster response time. With the integrated display and the colour-changing LED display, the sensor always provides real-time information about the current CO2 value, the battery level and the status of the LoRaWAN® connection. An optimal stationary and mobile companion in the company, at the workplace, in the meeting room at a meeting or in the canteen. It can be placed on any flat surface. In addition, the device can also be used "stand alone", i.e. without a LoRaWAN® connection, e.g. at a meeting outside the company, when visiting a customer or a restaurant outside the range of the LoRaWAN® network. Without LoRaWAN® connection, however, no remote monitoring or alarming can take place. The CO2 limits can be set individually by radio command (downlink). The device can be operated with the integrated rechargeable battery or permanently powered by a standard USB-A power supply unit 5V. Please note that only the USB-A to USB-C charging cable is included, a power supply unit is also required. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ZENNER CO2 Indicator is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the ZENNER CO2 Indicator data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  NOW NEW also available and expandable within the Actillity ZENNER DataCake Starterkit on ThingPARK. Download CO2 Sensor Actility ZENNER Datacake Bundle Link to ThingPARK Actility ZENNER DataCake AirQuality Solution Use Cases Indoor Air Quality Smart Building Smart School Smart Office Smart Home Product Features Modern design Display with CO2 indication (ppm) as well as quality of LoRaWAN connection and battery status LED traffic light Integrated battery Configuration Over the Air (OTA) Evaluation of the CO2 measured values Range (ex works) Evaluation LED Farbe < 800ppm normal green 800 – 999ppm slightly increased yellow 1.000 – 1.399ppm high purple > 1.399ppm very high red The measuring ranges can be set individually via LoRaWAN® downlink. Specifications Model CO2 INDICATOR L868 ID A Weight 115g Size 63,6 x 46,0 x 54,6mm Display Size 59,9 x 49,9mm LoRaWAN® Klasse A Frequency 863 ~ 870MHz Transmit Power max. 14dBm Battery 2.000mAh Power Input 5V⎓ 1A (Hinweis: im Lieferumfang ist kein Netzteil enthalten) Operating Temperature 0 ~ 40℃ Operating Humidity 0 ~ 99%rH (nicht kondensierende Umgebung) CO2 Measuring Range 400 ~ 9.999ppm Accuracy of 400 ~ 2.000ppm --> ±50ppm Accuracy of 2.000 ~ 9.999ppm --> no guarantee    Scope of Delivery ZENNER CO2 Indicator L868 ID A for LoRaWAN User Manual USB-A to USB-C Cabel Notice: There is no 5V power supply included in the delivery.  You can use a commercially available smartphone USB-A power adapter, for this purpose.
Manufacturer: ZENNER

€79.00* €99.90* (20.92% saved)
Tip
VICKI LoRaWAN® Thermostatic radiator valve
VICKI LoRaWAN® Thermostatic radiator valve Vicki is the perfect solution for all those who are looking for an intelligent and efficient radiator thermostat, want to control it conveniently from anywhere and at the same time want to save a lot of energy costs.With Vicki, you can easily and conveniently regulate your room temperature, even remotely. The Vicki radiator thermostat is very easy to retrofit and monitors the temperature and humidity for you. You set the desired target temperature by simply turning the outer ring of the device. At the same time, the target temperature is displayed directly on the device and is easy to read. Vicki is so smart that it automatically detects when you open a window and temporarily regulates the radiator in that room down. This way, you never run the risk of wasting unnecessary energy when ventilating.Two lithium batteries are included in the delivery.  Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: VICKI LoRaWAN Measurement parameters: Temperature: +/- 0.20°C Humidity: +/- 2% RH Dimension: 54mm x 78mm x 50mm Operating conditions: -20°C to +60°C Application area: Indoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: 2X AA Energizer Lithium L91 Battery replaceable: yes Battery life: up to 10 years
Manufacturer: MClimate

From €72.90*
%
Tip
SENSATIVE Strips Multisensor +Comfort for LoRaWAN®
SENSATIVE Strips Multisensor MS +Comfort for LoRaWAN® The Strips Multisensor +Comfort from SENSATIVE has several promising applications and is the ideal choice for a professional indoor IoT application. Due to its ultra-slim shape, the sensor can be mounted almost anywhere. The minimalist design as well as the easy installation and long battery life, make the Strips the go-to sensor for architects and design-conscious users. From the factory, the sensor measures the temperature, humidity and brightness (LUX) of the environment. In addition, the integrated magnetic sensor for monitoring doors and windows  can be activated. The data and measured values are transmitted to the corresponding backend via LoRaWAN®. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Multisensor +Comfort for LoRaWAN® is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser     Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: Strips MS +Comfort Measurement parameters: Temperature: +/- 0.40°C Humidity: +/- 3% RH Ambient light: 1-64000 LUX Configurable: Magnetic sensor (door and window) Dimension: 195mm x 15mm x 3mm Operating conditions: -30°C to +60°C Application area: Indoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip
Manufacturer: Sensative

€59.90* €99.95* (40.07% saved)
ZENNER IoT GatewayPLUS Outdoor with LoRaWAN® network
Powerful Outdoor IoT GatewayPLUS in the LoRaWAN® Network EUROPE of ZENNER Connect GmbH The ZENNER IoT GatewayPLUS Outdoor for building LoRaWAN coverage and realising IoT use cases. The ZENNER IoT GatewayPLUS Outdoor uses the powerful LoRaWAN technology, whose excellent building penetration and wide-area network coverage ensure the connectivity of IoT sensors even under difficult environmental and installation conditions. The outdoor gateway is ideal for LoRaWAN network coverage in rural and urban areas to receive readings from multiple sensors. The device can be used across divisions for a wide range of IoT applications and is an integral part of the ZENNER IoT system solutions. With just a few gateways, entire cities can be covered. Thanks to the very robust housing made of painted aluminium, the outdoor gateway is very resilient to extreme weather conditions and is characterised by a high level of fail-safety. In addition to the two external LoRa antennas for the 16 Channels, the ZENNER IoT GatewayPLUS Outdoor also uses an external LTE antenna to ensure the best possible connection to the backend - provided there is no Ethernet connection. This feature is not found in comparable competitor products. The gateway ensures LoRaWAN reception of your LoRaWAN end devices in the gateway's reception area and transmits their data to the backend. In addition to the reception of your devices beyond your own gateway, you also receive their data as a special added value if they are received by one of the other gateways in the ZENNER Connect LoRaWAN network EUROPE. Like all data transmissions, this is of course secure and AES 128 encrypted. The GatewayPLUS OUTDOOR gives you access to the LoRaWAN® network EUROPE of ZENNER Connect. In order to automatically establish a network connection after commissioning, the gateway has already been stored for you in the backend system B.One Middleware. You therefore do not have to integrate the gateway into the system yourself. The access to your personal B.One Middleware account/client, which you receive after ordering, is ultimately only required for the installation of sensors whose data you want to receive via the gateway. Unless: You order your sensors with the practical ZENNER IoT PLUG&PLAY booking-in service (more on this below or on the product pages of the respective sensors). The gateway is therefore already completely and permanently pre-configured and an integral part of the ZENNER Connect EUROPE LoRaWAN® network, you only need to establish the power supply. With the gateway, the LoRaWAN® data transmission of 50 own LoRaWAN end devices is included in the purchase price for 24 months. The data transmission from your gateway to the backend system is carried out via the SIM card of ZENNER Connect included in the Gateway. If you are planning a larger project, please contact us. We will be happy to support and advise you individually. By the way: ZENNER includes everything you need to operate the gateway in the scope of delivery - from the mounting device to all antennas and cables. Scope of use ZENNER IoT GatewayPLUS Outdoor: With the ZENNER IoT GatewayPLUS Outdoor you receive LoRaWAN connectivity and data transmission in the ZENNER Connect network EUROPE for 24 months and use of up to 50 LoRaWAN IoT sensors. The gateway is part of the LoRaWAN network of ZENNER Connect GmbH (ZC). Due to the technology, all LoRaWAN end devices in the reception range of your gateway are received in encrypted form and transmitted to the network provider. Of course, you only receive the data of your own end devices! Due to network regulation, the gateway is to be used within the European Union and currently ONLY in the following COUNTRIES! GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA.   Associated User Agreement ZENNER IoT GatewayPLUS Outdoor: Please note: This corresponding associated user agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway.   LoRaWAN® network coverage ZENNER Connect: To the overview map of our network coverage: To the network coverage   NEW OPTIONAL: Order the B.One Gallery visualisation solution for 24 months and for 50 devices with ZENNER IoT PLUG&PLAY directly. In addition, you secure the possibility that your purchased sensors can be automatically created in the ZC LoRaWAN network and already added to your B.One Gallery with the ZENNER IoT PLUG&PLAY login service. No more cumbersome configuration, setup, authentication of sensors necessary in the visualisation. As simple as IoT should be.   User agreement for the visualisation solution B.One Gallery: => Please note when choosing the ZENNER IoT PLUG&PLAY OPTION! that this associated User Agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway with the ZENNER IoT PLUG&PLAY OPTION choosen.   Exchange and inspiration in the B.One Community Have you already implemented your own LoRaWAN® use cases in the Internet of Things or are you new to the topic and would like to exchange ideas? Or has your boss given you the task of diving into the Internet of Things? Then the new B.One Community is the right place for you! Join the B.One Community   Features and functions of the GatewyPLUS Outdoor: Suitable for LoRaWAN IoT solutions ZENNER Connect GmbH is the LoRaWAN® network operator of your gateway. This means that you do not need to register as an independent LoRaWAN® network operator. Gateway use ONLY in the following countries of the European Union: GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA. Bidirectional LoRaWAN radio communication Secure encrypted data transmission end-to-end (AES 128) No storage of sensor data such as meter readings on the gateway LoRaWAN gateway modules according to reference architecture 1.5 Automatic switch from mobile radio (already included) to Ethernet backhaul possible, Attention! If the gateway is connected to an Ethernet connection, the customer establishes the data transmission from the gateway to the backend via his own Internet connection!  This may incur additional costs for the data transmission! Therefore, use the connection via the integrated mobile radio data card/SIM, which is already included. This way you will not incur any additional data transmission costs! Manufacturer's Declaration of Conformity including all applicable radio, low voltage and electricity regulations of Europe and RED (Radio Equipment Directive). Please note: The reception quality and range of your LoRaWAN gateway depends on the mounting or installation location you choose. For details, please refer to the installation instructions and the additional technical documentation. You need mobile radio coverage at the installation or mounting location of the gateway! Alternatively, a separate Ethernet connection. For operation, you need a standard 230V power connection/socket! Plug & Play - easy integration through pre-configured software Security patches and software updates are distributed automatically LoRaWAN gateway modules according to reference architecture 1.5 Automatic switch from mobile radio to Ethernet backhaul (if available) Manufacturer's Declaration of Conformity including all applicable radio, low voltage and electricity regulations of Europe and RED (Radio Equipment Directive) Application areas: Optimal for outdoor IoT use cases Smart City, Smart Parking, Smart Waste, Smart Lighting, ... e.g. monitoring of local network transformer stations; shaft meter reading Smart Industry, Retail, Logistics, SMB, Smart Agriculture & Farming, Asset Tracking... Scope of delivery: IoT Outdoor GatewayPLUS 2x LoRa antenna incl. antenna cable 1x LTE antenna incl. antenna cable 1x Ethernet cable (5m) Mounting device incl. pole mount PoE injector Potential equalisation cable (earthing cable) Cable tie Technical data: Mobile radio: Mini SIM - 2G, 3G (UMTS), 4G (LTE) - external LTE antenna Ethernet: RJ45 - priority over mobile radio LoRa channel: 16 channels - two external antennas TX power: max. 27 dBm (500 mW) conducted Frequency: EU-868 Power supply: Power over Ethernet (PoE) Antennas: External: 2 x LoRa, 1 x LTE (antennas incl. holder included in delivery) Protection class: IP67 Housing: Aluminium, lacquered Operating temperature: 0°C to +50°C Storage temperature: -40°C to +80°C Mounting: Wall, pole (bracket incl. earth cable included, galvanised steel) Maintenance: Remote firmware upgrades via ZENNER Cloud Certification: EN 301 489-3, EN 300 220-2
Manufacturer: ZENNER

€989.00*
Tip
ZENNER IoT GatewayPLUS SMART with LoRaWAN® network
Powerful Indoor GatewayPLUS SMART in the LoRaWAN® Network EUROPE of ZENNER Connect The ZENNER IoT GatewayPLUS SMART uses powerful LoRaWAN® technology, whose excellent building penetration and wide-area network coverage ensure connectivity of IoT sensors even under difficult environmental and installation conditions. This indoor gateway is ideally suited for receiving your LoRaWAN® devices and sensors inside a building and in the immediate vicinity, in order to receive the values of sometimes difficult-to-access sensors on several floors as well as basements, garages, gardens, car parks - all without additional repeaters. It can be used across all sectors for a wide range of IoT applications. The smart gateway ensures the LoRaWAN® reception of your LoRaWAN® end devices in the reception area of the gateway and transmits their data to the backend. In addition to the reception of your devices beyond your own gateway, you also receive their data as a special added value if they are received by one of the other gateways in the ZENNER Connect LoRaWAN® network EUROPE. Like all data transmissions, of course, secure and AES 128 encrypted. The GatewayPLUS SMART gives you access to the ZENNER Connect LoRaWAN® network EUROPE. In order to automatically establish a network connection after commissioning, the gateway has already been stored for you in the backend system B.One Middleware. You therefore do not have to integrate the gateway into the system yourself. The access to your personal B.One Middleware account/client that you receive after ordering is ultimately only required for the installation of sensors whose data you want to receive via the gateway. Unless: You order your sensors with the practical ZENNER IoT PLUG&PLAY booking-in service (more on this below or on the product pages of the respective sensors). The gateway is therefore already completely and permanently pre-configured and an integral part of the ZENNER Connect LoRaWAN® network EUROPE, you only need to establish the power supply, connect the gateway to your WLAN and you can start immediately. With the gateway, the LoRaWAN® data transmission of 50 own LoRaWAN end devices is included in the purchase price for 24 months. Data transmission from your gateway to the backend system via your WLAN connection may incur additional costs. If you are planning a larger project, please contact us. We will be happy to provide you with individual support and advice. Scope of use ZENNER IoT GatewayPLUS SMART: With the ZENNER IoT GatewayPLUS SMART you receive LoRaWAN® connectivity and data transmission via your Wi-Fi in the ZENNER Connect LoRaWAN® network EUROPE for 24 months and use of up to 50 LoRaWAN® IoT sensors. The gateway is part of the LoRaWAN® network of ZENNER Connect GmbH (ZC). Due to the technology, all LoRaWAN® end devices in the reception range of your gateway are received in encrypted form and transmitted to the network provider via your Wi-Fi! Of course, you only receive the data of your own end devices! Due to network regulation, the gateway is to be used within the European Union and currently ONLY in the following COUNTRIES! GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA. User Agreement ZENNER IoT GatewayPLUS SMART: Please note: This associated user agreement (also to be found below under "Available Downloads") is part of the contract when purchasing this gateway.   LoRaWAN® network coverage ZENNER Connect: To the overview map of our network coverage: https://www.mz-connect.com/netzabdeckung/   NEW OPTIONAL: Order the B.One Gallery visualisation solution for 24 months and for 50 devices with ZENNER IoT PLUG&PLAY directly. In addition, you secure the possibility that your purchased sensors can be automatically created in the ZC LoRaWAN network and already added to your B.One Gallery with the ZENNER IoT PLUG&PLAY login service. No more cumbersome configuration, setup, authentication of sensors necessary in the visualisation. As simple as IoT should be.   User agreement for the visualisation solution B.One Gallery: => Please note when choosing the ZENNER IoT PLUG&PLAY OPTION! that this associated User Agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway with the ZENNER IoT PLUG&PLAY OPTION choosen.   Exchange and inspiration in the B.One Community Have you already implemented your own LoRaWAN® use cases in the Internet of Things or are you new to the topic and would like to exchange ideas? Or has your boss given you the task of diving into the Internet of Things? Then the new B.One Community is the right place for you! Join the B.One Community   Features and functions of GatewayPLUS Smart Suitable for LoRaWAN® IoT solutions ZENNER Connect GmbH is the LoRaWAN® network operator of your gateway. This means that you do not need to register as an independent LoRaWAN® network operator. Gateway use ONLY in the following countries of the European Union:GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA. Bidirectional LoRaWAN® radio communication Secure encrypted data transmission end-to-end (AES 128) No storage of sensor data such as meter reading values on the gateway LoRaWAN® gateway modules according to reference architecture 1.5 Connection to the backend with available WLAN network.Attention: The customer establishes the data transmission from the gateway to the backend via his own internet connection. This may incur additional costs for data transmission. Please note: The reception quality and range of your LoRaWAN® gateway depends on the installation location you have chosen. For details, please refer to the installation instructions or the User Guide. The average reception coverage inside a building can be up to 8-10 floors, depending on the building characteristics. The reception coverage outside the building where the gateway is mounted can be up to 1 kilometer. You will need WLAN connectivity at the gateway's mounting location. For operation you need a standard 230V power connection/socket. Declaration of Conformity (CE) and RoHS standards are complied with. Areas of application: Optimal for LoRaWAN® based IoT applications in buildings as well as in the building environment. Smart Building / Home / Office / School / Parking Indoor air quality measurement Submetering Technical data: Backhaul: Wi-Fi 802.11 b/g/n, frequency band: 2.4 GHz, security: WPA/WPA2 LoRa Channel: 8 channels, receive sensitivity: -140dBm, internal antenna TX power: up to +20dBm Frequency: EU-868 (862 - 870MHz) Power supply: 230V power outlet (Euro plug) / USB Type-C (900mA). Antennas: Internal - 1 x LoRa, 1 x Wi-Fi Protection class: IP40 Housing: Plastic with flame retardant according to UL94-2013 Rev.9-2019, class.: V-0 Dimensions [L x W x H]: 100 x 82 x 38 mm Weight: 160g Operating temperature: 0 °C to +40 °C Storage temperature: -40 °C to +70 °C LED: Wi-Fi status Preconfigured and connected to the ZENNER Connect LoRaWAN® network.(this is NOT changeable!) Mounting: power socket Standards: CE, RoHS
Manufacturer: ZENNER

€124.95*
ZENNER IoT GatewayPLUS Indoor with LoRaWAN® network
Powerful Indoor IoT GatewayPLUS in the LoRaWAN® Network EUROPE of ZENNER Connect GmbH The ZENNER IoT GatewayPLUS Indoor uses the powerful LoRaWAN® technology, whose excellent building penetration and wide-area network coverage ensure the connectivity of IoT sensors even under difficult environmental and installation conditions. The Indoor Gateway is ideal for receiving your LoRaWAN® devices and sensors inside a building and in the immediate vicinity, to receive the values of sometimes difficult-to-access sensors on several floors as well as basements, garages, gardens, car parks - all without additional repeaters. The device can be used across all sectors for a wide range of IoT applications. The ZENNER IoT GatewayPLUS Indoor has already been installed in over 30,000 LoRaWAN®system installations of the Minol ZENNER Group and is an integral part of many Minol ZENNER IoT system solutions. Due to its intentionally simple design, the gateway is hardly noticeable in its environment. The gateway ensures the LoRaWAN® reception of your LoRaWAN® end devices in the reception area of the gateway and transmits their data to the backend. In addition to the reception of your devices beyond your own gateway, you also receive their data as a special added value if they are received by one of the other gateways in the ZENNER Connect LoRaWAN® network EUROPE. Like all data transmissions, this is of course secure and AES 128 encrypted. The GatewayPLUS INDOOR gives you access to the LoRaWAN® network EUROPE of ZENNER Connect. In order to automatically establish a network connection after commissioning, the gateway has already been stored for you in the backend system B.One Middleware. You therefore do not have to integrate the gateway into the system yourself. The access to your personal B.One Middleware account/client, which you receive after ordering, is ultimately only required for the installation of sensors whose data you want to receive via the gateway. Unless: You order your sensors with the practical ZENNER IoT PLUG&PLAY booking-in service (more on this below or on the product pages of the respective sensors). The gateway is therefore already completely and permanently pre-configured and an integral part of the ZENNER Connect EUROPE LoRaWAN® network, you only need to establish the power supply. With the gateway, the LoRaWAN® data transmission of 50 own LoRaWAN end devices is included in the purchase price for 24 months. The data transmission from your gateway to the backend system is carried out via the SIM card of ZENNER Connect included in the Gateway. If you are planning a larger project, please contact us. We will be happy to support and advise you individually. Scope of use ZENNER IoT GatewayPLUS Indoor: With the ZENNER IoT GatewayPLUS Indoor you receive LoRaWAN® connectivity and data transmission in the ZENNER Connect EUROPE LoRaWAN® network for 24 months and use of up to 50 LoRaWAN® IoT sensors. The gateway is part of the LoRaWAN® network of ZENNER Connect GmbH (ZC). Due to the technology, all LoRaWAN® end devices in the reception range of your gateway are received in encrypted form and transmitted to the network provider. Of course, you only receive the data of your own end devices! Due to network regulation, the gateway is to be used within the European Union and currently ONLY in the following COUNTRIES! GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA. User Agreement ZENNER IoT GatewayPLUS Indoor: Please note: This associated user agreement (also to be found below under "Available Downloads") is part of the contract when purchasing this gateway.   LoRaWAN® network coverage ZENNER Connect: To the overview map of our network coverage: To the network coverage   NEW OPTIONAL: Order the B.One Gallery visualisation solution for 24 months and for 50 devices with ZENNER IoT PLUG&PLAY directly. In addition, you secure the possibility that your purchased sensors can be automatically created in the ZC LoRaWAN network and already added to your B.One Gallery with the ZENNER IoT PLUG&PLAY login service. No more cumbersome configuration, setup, authentication of sensors necessary in the visualisation. As simple as IoT should be.   User agreement for the visualisation solution B.One Gallery: => Please note when choosing the ZENNER IoT PLUG&PLAY OPTION! that this associated User Agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway with the ZENNER IoT PLUG&PLAY OPTION choosen.   Exchange and inspiration in the B.One Community Have you already implemented your own LoRaWAN® use cases in the Internet of Things or are you new to the topic and would like to exchange ideas? Or has your boss given you the task of diving into the Internet of Things? Then the new B.One Community is the right place for you! Join the B.One Community   Features and functions of GatewayPLUS Indoor: Suitable for LoRaWAN® IoT solutions ZENNER Connect GmbH is the LoRaWAN® network operator of your gateway. This means that you do not need to register as an independent LoRaWAN® network operator. Gateway use ONLY in the following countries of the European Union:GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA. Bidirectional LoRaWAN® radio communication Secure encrypted data transmission end-to-end (AES 128) No storage of sensor data such as meter readings on the gateway LoRaWAN®gateway modules according to reference architecture 1.5 Automatic switch from mobile radio (already included) to Ethernet backhaul possible. Attention: If the gateway is connected to a LAN connection, the customer establishes the data transmission from the gateway to the backend via his own Internet connection! This may incur additional costs for data transmission! Therefore, use the connection via the integrated mobile radio data card/SIM, which is already included. This way you will not incur any additional data transmission costs! Manufacturer's Declaration of Conformity including all applicable radio, low voltage and electricity regulations of Europe and RED (Radio Equipment Directive). Please note: The reception quality and range of your LoRaWAN®gateway depends on the mounting or installation location you choose. For details, please refer to the installation instructions and the additional technical documentation. The average reception area inside a building can cover up to 8-10 floors, depending on the nature of the building. The reception coverage outside the building in which the gateway is installed can be up to 1 kilometre. You need mobile radio coverage at the installation or mounting location of the gateway! Alternatively, a separate Ethernet connection. For operation, you need a standard 230V power connection/socket. Areas of application: Optimal for LoRaWAN® based IoT applications in buildings as well as in the building environment. Smart Building / Home / Office / School / Parking Smart City / Smart Industry Indoor air quality measurement Technical data: Cellular: Mini SIM - 2G, 3G (UMTS), 4G (LTE) - internal antenna Ethernet RJ45 - priority over cellular. Ethernet: RJ45 - priority over mobile radio LoRa channel: 8 channels - internal antenna(s) TX power: max. 27 dBm (500 mW) conducted Frequency: EU-868 MHz Power supply: External power supply (230V) included. Antennas: Internal - 1 x LoRa, 1 x mobile radio Protection class: IP30 Housing: Plastic with flame protection according to UL94-2013 Rev.9-2019, class.:V0 Dimensions [L x W x H]: 18.4 x 12.7 x 4.8 cm Operating temperature: 0°C to +50°C Storage temperature: -40°C to +80°C LED: Power, LAN, mobile radio, Preconfigured and connected to the ZENNER Connect LoRaWAN® network (this is NOT changeable!) Mounting: Wall (bracket incl. screws and dowels included) Maintenance: Remote firmware upgrades are automatic. Certification: EN 301 489-3, EN 300 220-2
Manufacturer: ZENNER

€369.00*
Netvox Door & window contact sensor (reed) R718F with LoRaWAN®
LoRaWAN® R718F Door & Window Contact Sensor (Reed) from Netvox for Monitoring Opening Conditions The netvox R718F is equipped with a reed switch that can be used to detect the status "open" or "closed". Inside the magnetic range, the reed switch is switched on (conductive) and outside it is switched off (non-conductive). Thus, the module can detect the closing and opening signals. This makes the sensor ideal for monitoring doors and windows. Thanks to the built-in radio module, information and data can be sent wirelessly to the LoRaWAN® gateway. The door and window contact sensor is battery-operated and has low energy consumption. Areas of application: Monitoring of doors, windows and garage doors Tracking of production lines   OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Netvox R718F is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 
Manufacturer: Netvox

€99.00*
Tip
WILSEN wireless ultrasonic sensor WS-UCC4000
Wireless ultrasonic sensor with LoRaWAN® interface WS-UCC4000 The wireless ultrasonic sensor can be used for remote monitoring of fill level.The fill level, but also other parameters such as geo data and sensor status data, are measured or recorded in configurable time intervals andtransmitted to a counterpart in the LoRa network from where they are available for pure display or further processing.The sensor is parameterised via a Bluetooth interface using a mobile device (smartphone or tablet) and the WILSEN app belonging to the sensor. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased WILSEN wireless ultrasonic sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser Battery powered Data transmission via LoRaWAN LoRaWAN downlink channel for querying and adjusting parameter values Bluetooth interface for commissioning, parameterization and diagnostics
Manufacturer: Pepperl+Fuchs

€392.90*
%
Netvox Wireless Activity Detection Sensor R311FA mit LoRaWAN®
NETVOX R311FA Wireless Activity Detection Sensor LoRaWAN® The Netvox R311FA sensor is a LoRaWAN® Class A device and is equipped with an accelerometer that can be used to detect vibration or motion. As soon as the sensor detects motion or vibration, it triggers an alarm and sends an immediate message to the connected backend. With ZENNER's ELEMENT IoT platform, for example, you can directly receive an immediate email via the alarm and rule management. The Activity Sensor is battery-powered and has low energy consumption. It can be mounted using the double-sided adhesive tape already present on the housing. Areas of application: Smart Home Industrial equipment Security area/ Anti-theft device Indoor Central product features: Motion detection by acceleration sensor (accelerometer) Sensitivity of vibration intensity: 62.5mg OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Decentlab R311FA is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 
Manufacturer: Netvox

€52.90* €62.90* (15.9% saved)
previously €60.90*
TEKTELIC KONA Industrial GPS Asset Tracker Class A
LoRaWAN® based GPS Tracker from TEKTELIC for industrial Asset Management. The KONA Industrial GPS Tracker provides GPS-enabled real-time location of fixed and mobile assets over LoRaWAN®. This device provides GPS enabled near real-time satellite location tracking with LoRaWAN®. The rugged IP67 design allows for operation in diverse deployment environments, with an operable temperature range of -40°C to +65°C. This device provides GPS enabled near real-time satellite location tracking with LoRaWAN®. The rugged IP67 design allows for operation in diverse deployment environments and an optional BLE integration. The device contains 2x D Cell batteries for optimal battery life of up to 8-10 years. The unit is equipped with an accelerometer to accommodate event-based start-up, minimizing unnecessary battery usage. Key product features: 8-10 year battery life Precise GPS Data transmission via LoRaWAN Rugged IP67 design Accelerometer Internal antenna Class A Further technical information is contained in the manufacturer's datasheet, which you can find below under "Related Links".
Manufacturer: TEKTELIC

€178.00*

OUR IoT PLUG&PLAY USE CASES

OUR SPECIAL OFFERS

OUR SERVICES